Description

Cap stopper for sliding rail system

Cap stopper for sliding rail system: also called iron track end cap or sliding door trolley stopper​, is an essential component to prevent doors, gates or tarpaulins from rolling out of the rail. Stoppers can limit the sliding and prevent moving elements from opening or closing excessively.

Safety: proper restraint prevents accidents caused by uncontrolled opening or closing.

Protection: rail stoppers protect doors and gates from damage caused by impacts against the ends of neighbouring surfaces.

Easy to install: with this accessory, you can easily block the movement of the rail sliders, using it as an end cap stop or as a stopper at an intermediate point.

Made of Nylon, this cap stopper sliding rail system is compatible with MR3 profiles and offers a long service life.

Ideal for sliding door system. Effectively prevents pulleys from sliding off the track, ensuring safety and stability when using sliding doors gates and tarpaulins.

How to install the stop:

1. Assemble the end stops with the supplied screw and washers. The screw should be inserted into the hole on the lower side where the recess is present.
2. Ensure that the screw remains as far out as possible to allow space for the thickness of the monorail.
3. Insert the stop leaving the flat side facing outwards. Then insert it with the convex-shaped side inwards.
4. With a flat-head screwdriver, lock the stop in the monorail at the desired point.

Also purchase the nylon floor guide for sliding door for smooth and safe sliding!